GF-DIO (Digital Input/Output) Board

Installing the GF-DIO Software
Installing the latest GoFlight Technologies software  Note – If you own other GoFlight hardware and have already installed the latest version of GoFl...
Thu, 2 Jul, 2015 at 10:04 AM
Mounting the GF-DIO
Mounting the GF-DIO Board Mounting Options:  Option 1 – Screw Mounted (not pictured) The DIO board comes with standoff screws giving you the...
Thu, 2 Jul, 2015 at 10:06 AM
Plugging in the GF-DIO Hardware
Plugging in the hardware  Example: To connect the individual hardware components to the DIO Board, use the cable assemblies that come with your DIO...
Thu, 2 Jul, 2015 at 10:07 AM
Connecting the Hardware to the DIO Board
The GF-DIO Board comes with 88 positions for components to be added. Each position is a made up of a 3-pin connection. Once the hardware components are ...
Thu, 2 Jul, 2015 at 10:08 AM
Connecting the GF-DIO Board
Now the GF-DIO Board must be connected to the computer. With the provided USB cable, simply plug the appropriately matching ends into both the GF-DIO Boa...
Thu, 2 Jul, 2015 at 10:09 AM
Configuring the GF-DIO Board
Now that the GF-DIO Board is connected to the computer it is ready for configuration. Turn on the computer and start the GF-Config program. GF-Config start...
Thu, 2 Jul, 2015 at 10:11 AM
Configure the GF-DIO with Keystrokes
If configuring the GF-DIO Board through key strokes is preferred, this too can be done through GF-Config. Start by flipping the desired switch to be progra...
Thu, 2 Jul, 2015 at 10:12 AM