Installing and Removing Detent Plates
Your GF-TQ6 ships from the factory with two detent plates than can be optionally mounted to the top panel of the GF-TQ6 enclosure. These detent plates provide stopping points for the control levers in the A and F positions. One of the plates is designed to provide detents for spoiler control, with stops in the Fully Retracted, Armed, and Operating Range positions. The other plate provides detents for up to
6 “notches” of flaps. Using GF-Config software, you can designate various control actions to occur when the control levers are placed each of the detent position, referred to in the software as “zones.” For more information about zone assignments, please refer to the GF-Config on-line help.