GF-Pro Yoke

System

 

 

 

Congratulations on your purchase of the GoFlight Pro Yoke System part of the extensive family of GoFlight GF-AC Cockpit control System modules.  The GF-Pro Yoke System is designed to operate with a wide variety of aircraft and is sure to make your flight simulation experience more realistic and enjoyable.

 

The steps below will assist in the installation, configuration and operation of the GF-Pro Yoke System. Following these instructions will help to get you up in the “virtual skies” as quickly as possible.

 

 

Installing the Pro Yoke System

 

After unpacking, please verify that your GF-Pro Yoke System package contains the following items.

Quantity Description

One (1) GF-Pro Yoke System

One (1) USB Cable

Three (3) Velcro strips for additional mounting

 

Installing the pro-yoke system to your desktop.

 

Open the clamp adjustment wheels located on the top right and left of the case. Now place on your Yoke on the desktop and tighten in till secure.

 

Installing the USB Cable.

 

Connect the USB Cable to the USB in port on the back of the pro Yoke.

Connect the other end of the USB cable to your computer or your hub.

Now connection is made and your computer should now see the pro Yoke.

 

Calibrating the Pro Yoke

 

To calibrate your Pro Yoke, Open your windows control panel and go to

Find Devices and printers. Find the GF-YOKE, Right Click on the yoke and Choose Game settings. Then the calibrator will open up. Click Properties, then calibrate. Follow the on screen instructions. After calibration is complete, click “apply” and exit. Now your GF-Yoke is ready to be setup.

 

 

 

 

 

 

 

 

 


Click Properties.

 

Click Calibrate.

 

 

 

Test all buttons and axes, and then click Apply.

 

 

 

 

Setting up your Pro Yoke in FS9 or FSX

 

Open up your FS9 or FSX and then go to the settings. Select assignments or controls. Now click on the button's tab. Now make sure that your pro yoke is in the hardware Type pull down menu. Now select the functions you want to use for your pro Yoke.

 

 

Using FSUIPC TO PROGRAM YOUR PRO YOKE

 

The Pro Yoke can also be programmed using FSUIPC.

 

 

 

 

 

 

Description of the left handle

 

There are two (2) two-way switches at the top of the handle that can be programmed to any function that you want to use.  We recommend View Selection and Pitch Trim, but the option is yours! 

 

Just below the two-way switches, is the hat switch, which is designated for interior cockpit views.

 

The switch located on the handle can also be programmed for any function. We suggest Auto Pilot Disengage.

 

 

 

 

 

 

 

 

 

 

 

Description of right handle

 

On the right handle is something new, a joy stick to control all your mouse functions.  You can use it to flip your switches on your overhead or main panel without taking your hands off your Pro Yoke. Use your thumb to move the mouse around and push down to click.

 

 

Setting the mouse speed

 

To make your Pro Yoke mouse work at its best you will need to adjust the speed. Open your windows control panel and adjust your mouse speed the same way as you would adjust for a conventional mouse.

 

 

 

 

 

 

 

Back side of both left and right handle

 

On the back side of both handles is a single trigger switch.  This trigger switch is best used for intercom mic but can still be programmed for a number of other functions.  The two mic trigger switches are wired together, so which ever function you program, they will both be assigned to that function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Takeoff and landing check list

 

 

Each Yoke handle comes with a check list for takeoff and approach. This single panel is finished with a black powder coat and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you have any questions or problems setting up your GoFlight Pro Yoke System you can contact our Tech Support at techsupport@goflightinc.com  or call 503-895-7020

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GF-Pro Yoke Warranty

This product is warranted to the original purchaser to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. During this warranty period, GoFlight Technologies, Inc. ® (“GoFlight”) will, at its option, repair or replace, at no charge, any component determined to be defective. The liability under this warranty is limited to the repair and/or replacement of the defect or defective part, and does not include shipping expenses. This warranty does not apply if, in the determination of GoFlight, this product has been damaged by accident, abuse, improper usage, or as a result of service or modification by anyone other than GoFlight. NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF SALABILITY AND FITNESS FOR A PARTICULAR PURPOSE. GOFLIGHT TECHNOLOGIES, INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

 

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

 

 

 

 

 


 

GoFlight Technologies, Inc.

163 SW Freeman Ave. Suite D, Hillsboro, Oregon, USA 97123

Phone: 1-503-895-0242

www.goflightinc.com

P/N GF-166-vPOH-002 Revision 2.2 25Sep2010

Copyright © 2010 GoFlight Technologies, Inc. All rights reserved.